Mitsubishi Electric MELSERVO-JN Series - About the manuals; About the wires used for wiring; U.S. customary units

A - 8
<<About the manuals>>
Relevant manuals
Manual name Manual No.
MELSERVO-JN Series Instructions and Cautions for Safe Use of AC Servos
(Enclosed in servo amplifier.)
IB(NA)0300157
QUICK INSTALLATION GUIDE L(NA)03052ENG
MELSERVO Servo Motor Instruction Manual Vol.2 SH(NA)030041ENG
MELSERVO Servo Motor Instruction Manual Vol.3 SH(NA)030113ENG
EMC Installation Guidelines IB(NA)67310
<<About the wires used for wiring>>
Wiring wires mentioned in this instruction manual are selected based on the ambient temperature of 40
(104
).
<<U.S. customary units>>
U.S. customary units are not shown in this manual. Convert the values if necessary according to the
following table.
Quantity SI (metric) unit U.S. customary unit
Mass 1 [kg] 2.2046 [lb]
Length 1 [mm] 0.03937 [inch]
Torque 1 [N•m] 141.6 [oz•inch]
Moment of inertia 1 [(× 10
-4
kg•m
2
)] 5.4675 [oz•inch
2
]
Load (thrust load/axial load) 1 [N] 0.2248 [lbf]
Temperature N [°C] × 9/5 + 32 N [°F]