Mitsubishi Electric Mr. SLIM SUZ-KA36NAH2 User Manual

INSTALLATION MANUAL
For safe and correct use, read this manual and the indoor unit installation manual thoroughly before installing
the air-conditioner unit.
MANUEL D’INSTALLATION
Avant d’installer le climatiseur, lire attentivement ce manuel, ainsi que le manuel d’installation de l’appareil
intérieur pour une utilisation sûre et correcte.
MANUAL DE INSTALACIÓN
Para un uso correcto y seguro, lea detalladamente este manual y el manual de instalación de la unidad interior
antes de instalar la unidad de aire acondicionado.
POUR L’INSTALLATEUR
PARA EL INSTALADOR
FOR INSTALLER
Air-Conditioners
SUZ-KA18, KA24, KA30, KA36NA(H)2
Français
Español
English
VG79A964H01_cover1.indd 1 2018/08/28 13:39:34

Mitsubishi Electric Mr. SLIM SUZ-KA36NAH2 Specifications

General

Brand	Mitsubishi Electric
Model	Mr. SLIM SUZ-KA36NAH2
Category	Air Conditioner
Language	English

Summary

Selecting the Installation Location

Outdoor Unit Location

Guidelines for selecting an appropriate location for the outdoor unit, considering wind, dust, noise, and gas.

Installation Diagram

Refrigerant Piping Work

Refrigerant Pipe Specifications

Details on pipe length, height difference, bends, and refrigerant charge limits for various models.

Flaring Work Procedure

Procedure for correctly flaring copper pipes, including tool usage and inspection for leak prevention.

Connecting Refrigerant Pipes

Instructions for connecting pipes, including flare nut tightening, oil application, and using two wrenches.

Purging and Leak Test

Steps for evacuating the system using a vacuum pump and performing a leak test after pipe connection.

Electrical Work

Connecting Wires for Outdoor Unit

Detailed steps for wiring the outdoor unit, including ground, power connections, and terminal block usage.

Field Electrical Wiring

Wiring specifications and circuit ratings for connecting indoor and outdoor units, including wire sizes and voltage.

Maintenance

Gas Charge Procedure

Procedure for charging refrigerant into the system, including connecting cylinder and replenishing specified amount.