To Next PageTo Next Page
Need help?Do you have a question about the Mitsubishi Electric MSZ-HM09NA and is the answer not in the manual?
General| Type | Wall-mounted |
|---|---|
| Cooling Capacity | 9, 000 BTU/h |
| Heating Seasonal Performance Factor (HSPF) | 10.0 |
| Refrigerant | R410A |
| Operating Temperature (Cooling) | 14°F to 115°F |
| Noise Level (Indoor) | 19 dB(A) |
| Indoor Unit Dimensions (H x W x D) | 31.5 |
| Outdoor Unit Dimensions (H x W x D) | 31.5 |
| Outdoor Unit Weight | 57 lbs |
| Power Supply | 60Hz |
| Operating Temperature (Heating) | 75°F |
Explains the significance of WARNING and CAUTION labels used in the manual for safety.
Illustrates symbols indicating actions to perform or avoid for safe operation.
Identifies and describes parts of the indoor air conditioning unit.
Identifies and describes parts of the outdoor air conditioning unit.
Details the functions and layout of the remote control unit.
Step-by-step guide for inserting batteries into the remote control.
Instructions on how to switch between Fahrenheit and Celsius temperature displays.
Explains how to use the cooling function for desired temperature.
Describes the dehumidification function for reducing room humidity.
Details how to use the heating function for warm air.
Provides instructions for operating the unit without the remote controller.
Explains how the unit resumes operation after a power interruption.
How to adjust the fan speed for different comfort levels.
How to adjust the vane position for optimal air circulation.
Explanation of the energy-saving cooling mode that enhances comfort.
Guide to setting the automatic start and stop timers for the unit.
Instructions for cleaning or replacing the air filters for optimal performance.
Steps for cleaning the front panel of the indoor unit.
Procedure for regular cleaning of the main air filters.
Common issues with the indoor unit and their possible solutions.
Common issues with the outdoor unit and their possible solutions.
Troubleshooting steps for problems with the remote control.
Addresses problems related to air output and operational sounds.
Steps to prepare the unit for extended periods of non-use.
Steps to take before resuming operation after long-term storage.
Guidelines for choosing suitable places to install the unit.
Lists locations that are unsuitable for installation to prevent issues.
Details necessary electrical connections and precautions for safe installation.
Specifies the operational temperature limits for cooling and heating.
