To Next PageTo Next PageWhy is my Mitsubishi Electric NTXUKS12A112BA Air Conditioner remote controller not working?
If your Mitsubishi Electric Air Conditioner remote controller isn't working, the batteries may be weak. Replace the batteries to restore normal operation.
What to do if my Mitsubishi Electric Air Conditioner indoor unit does not operate due to outdoor unit abnormality?
If the indoor unit of your Mitsubishi Electric Air Conditioner isn't working because of an outdoor unit issue, check the outdoor unit for any abnormalities using the detailed outdoor unit failure mode recall function.
What to do if my Mitsubishi Electric Air Conditioner indoor units cannot operate with one for cooling and the other for heating?
If your Mitsubishi Electric Air Conditioner indoor units are set to different operation modes (one for cooling and another for heating), they will not operate correctly. Ensure all indoor units are set to the same operation mode.
What to do if my Mitsubishi Electric NTXUKS12A112BA indoor unit does not operate due to the drain pump abnormality?
If your Mitsubishi Electric Air Conditioner indoor unit isn't operating due to a drain pump issue, it might be caused by an open float sensor or an abnormal water level detection. Check the float sensor characteristics and the drain pump.
General| Model | NTXUKS12A112BA |
|---|---|
| Cooling Capacity | 3.5 kW |
| Heating Capacity | 4.0 kW |
| Power Supply | 220-240 V, 50 Hz |
| Refrigerant | R32 |
| Noise Level (Outdoor Unit) | 50 dB(A) |
Provides electrical and physical specs for multi-connection models.
Electrical connection diagrams for various indoor unit models.
Illustrates refrigerant flow in cooling and heating modes.
Safety guidelines and initial steps for troubleshooting.
Recalling past errors and using diagnostic tables.
Criteria for checking parts and diagnostic flowcharts.
