13
Remote input (RX)
Bit data input from a slave station to the master station (For some areas in a local station, data are input in the
opposite direction.)
User's manual for the master/local module used
Remote output (RY)
Bit data output from the master station to a slave station (For some areas in a local station, data are output in
the opposite direction.)
User's manual for the master/local module used
Remote register (RWr)
Word data input from a slave station to the master station (For some areas in a local station, data are input in
the opposite direction.)
User's manual for the master/local module used
Remote register (RWw)
Word data output from the master station to a slave station (For some areas in a local station, data are output
in the opposite direction.)
User's manual for the master/local module used
REMTO The abbreviation for ZP.REMTO.
Reserved station A station reserved for future use. This station is not actually connected, but counted as a connected station
Return A process of restarting data link when a station recovers from an error
Simple motion module The abbreviation for the QD77GF CC-Link IE Field Network simple motion module
Slave station
A generic term for stations other than a master station: local station, remote I/O station, remote device station,
and intelligent device station
Transient transmission
A function of communication with another station, which is used when requested by a dedicated instruction or
GX Works2
Term Description
To Next Page
Loading...
