Mitsubishi Electric NZ2EX2B-60AD4 - Functions with the Extension A;D Converter Module Connected

150
8.18.2 Functions with the extension A/D converter module
connected
With the extension A/D converter module connected, A/D conversion processing of up to eight channels is possible.
(1) Available function with the extension A/D converter module connected
Here is the list of the available function with the extension A/D converter module connected:
(2) Supplementary information related to the connection of the extension A/D
converter module
Here is the list of the supplementary information related to the connection of the extension A/D converter module
for each drive mode:
Function Description
External power supply monitoring function
Monitors the on/off state of the external power supply of the extension A/D converter
module, indicating the monitored state by the RUN LED and External power supply READY
flag (RX2F) of the extension A/D converter module. For details, refer to the following:
• External power supply READY flag ( Page 197, Appendix 1.1 (12))
Drive mode
Supplementary information related to the connection of the
extension A/D converter module
Reference
Normal mode
Processing time (100μs) arises in the period from the completion
of conversion processing of each channel to the initiation of
conversion processing of the next channel.
Page 91, Section 8.5.1 (2)
Trigger conversion mode
Processing time (100μs) arises in the period from the completion
of conversion processing of each channel to the start of
conversion processing of the next channel.
Page 127, Section 8.15