192
(4) Remote READY
This signal is used as an interlock condition when the master station reads/writes data to/from the remote register
or remote buffer memory areas of the A/D converter module.
Upon turning on the module power supply, Remote READY (RXB) turns on.
As Error flag (RXA) turns on, Remote READY (RXB) turns off.
(a) Device number
The device number of this input signal is as follows:
(5) CH A/D conversion completed flag
CH A/D conversion completed flag (RX10 to RX13, RX20 to RX23) turns on as the A/D conversion is
completed in the A/D conversion enabled channels.
Turning on and off Initial data setting request flag (RY9) makes the signal return to the default state (off). When
A/D conversion is completed, the signal turns on.
(a) Device number
The device numbers of this input signal are as follows:
(6) CH Difference conversion state flag
This signal allows the difference conversion status to be checked.
• Changing CH Difference conversion trigger (RY14 to RY17, RY24 to RY27) from No request (OFF) to
Trigger request (ON) results in CH Difference conversion state flag (RX14 to RX17, RX24 to RX27) turning
to Converting difference (ON).
• Changing CH Difference conversion trigger (RY14 to RY17, RY24 to RY27) from Trigger request (ON) to
No request (OFF) results in CH Difference conversion state flag (RX14 to RX17, RX24 to RX27) turning
from Converting difference (ON) to Not converted (OFF).
(a) Device number
The device numbers of this input signal are as follows:
Signal name Main A/D converter module Extension A/D converter module
Remote READY RXB
Signal name
Main A/D converter module Extension A/D converter module
CH1 CH2 CH3 CH4 CH1 CH2 CH3 CH4
CH A/D conversion completed flag RX10 RX11 RX12 RX13 RX20 RX21 RX22 RX23
Difference conversion status
CH Difference conversion state flag (RX14 to RX17, RX24 to
RX27)
Not converted OFF
Converting difference ON
Signal name
Main A/D converter module Extension A/D converter module
CH1 CH2 CH3 CH4 CH1 CH2 CH3 CH4
CH Difference conversion state flag RX14 RX15 RX16 RX17 RX24 RX25 RX26 RX27