228
(29)Module operation information initialization completed
This memory area shows whether the module operation information stored in the non-volatile memory is
initialized or not.
(a) Behavior of module operation information initialization
Upon the completion of initializing the module operation information, Module operation information initialization
completed (address: 1005H) turns to Completed (1).
For the timing "Not performed (0) → Completed (1) → Not performed (0)", refer to the following:
• Module operation information initialization command ( Page 227, Appendix 3 (28))
(b) Default value
The default value is Not performed (0).
(c) Remote buffer memory address
The remote buffer memory address of this area is as follows:
Remote buffer memory name Main A/D converter module Extension A/D converter module
Module operation information initialization
completed
1005H
The values of b1 to b15 are fixed to 0. 0: Not performed
1: Completed
b0b15 b14 b13 b12 b11 b10 b9 b8 b7 b6 b5 b4 b3 b2 b1
0000000000 0000 0
To Next Page
Loading...
