56
Do not slide modules from the edge of the DIN rail when mounting them. Doing so may damage the metal part located on the
back of the module.
6. Hitch the upper hook of the DIN rail stopper to the
top of the DIN rail.
7. Slide the DIN rail stopper up to the left side of the
modules.
8. Hold the DIN rail stopper in the direction opposite to
the arrow on the stopper and tighten the screw with
a screwdriver.
9. Install the DIN rail stopper on the right side of the
module in the same procedure.
For the installation on the right side, be aware that the
orientation of the DIN rail stopper is upside down.
Engage the hook on
the top side of the DIN rail.
To Next Page
Loading...
