68
(e) Wiring method
● Avoid contact of the terminal and the screw with oil. Failure to do so may damage the screw.
● The number of the inserted applicable solderless terminals must be two or less.
When inserting two applicable solderless terminals, insert them back-to-back. Otherwise the screw cannot be tightened,
possibly causing damage to it.
● Tighten the terminal screw with an applicable screwdriver. Tightening with an inapplicable screwdriver may damage the
screw.
1. Loosen the terminal screw. A round solderless
terminal can be connected as it is.
Employs a captive
screw
Round solderless
terminal
To Next Page
Loading...
