Mitsubishi Electric NZ2GN2S1-16D - List of Recommended Cables;Connectors for the I;O Module (Waterproof Module)

148
6 INSTALLATION AND WIRING
6.10 List of Recommended Cables/Connectors for the I/O Module (Waterproof Module)
6.10 List of Recommended Cables/Connectors for the I/
O Module (Waterproof Module)
The following tables list applicable waterproof cables/connectors.
For details on applicable waterproof connectors, refer to the website of each manufacturer.
For power supply
The waterproof cables are listed below.
, of a model represents the length of the cable.
For I/O
The waterproof connectors/cables are listed below.
, of a model represents the length of the cable.
Y-branch connector for I/O
The waterproof connector is listed below.
Connector Model Connection cable
diameter
Manufacturer
M12
5 pins (4 + FE)
Male, female
L code SC-M12PWL5MF-,MU  Mitsubishi Electric System &
Service Co., Ltd.
M12
5 pins (4 + FE)
Female, discrete wire
SC-M12PWL5F-,MU
Connector Model Connection cable
diameter
Manufacturer
M12
5 pins
Male, discrete wire
A code SC-M12SNA5M-,MU  Mitsubishi Electric System &
Service Co., Ltd.
M12
4 pins
Male, discrete wire
SC-M12SNA4M-,MU
M12
5 pins
Male, discrete wire (shielded)
SC-M12SNA5SM-,MU
M12
4 pins
Male, discrete wire (shielded)
SC-M12SNA4SM-,MU
M12, A code  SACC-M12MS-5CON-PG 7-M 4.0 to 6.0mm PHOENIX CONTACT GmbH
& Co. KG
SACC-M12MS-5CON-PG 9-M 6.0 to 8.0mm
Connector Model Connection cable
diameter
Manufacturer
M12
5 pins
Male
A code SAC-5P-M12Y/2XM12FS VP  PHOENIX CONTACT GmbH
& Co. KG