234
APPX
Appendix 2 Remote Register
■External power supply monitor status (RWr2.b9)
The setting status of the external power supply monitoring function is shown.
Input ON/OFF information
■Device number
■Description
When the set time synchronization control mode is used, this area stores a value indicating the input change (whether rising
edge or falling edge) that has been detected at the timing of a value stored in Input time information X (RWr10 to RWr8F).
The value in this area is invalid until a value other than 0 (initial value) has been stored in Input time information X (RWr10
to RWr8F) after the I/O module starts.
■Input ON/OFF information X0 to XF (RWr4)
■Input ON/OFF information X10 to X1F (RWr5)
Value for RWr2.b9 Setting status
Off Disable
On Enable
Name Device number
Input ON/OFF information RWr4, RWr5
b15 b14 b13 b12 b11 b10 b9 b8 b7 b6 b5 b4 b3 b2 b1 b0
XF XE XD XC XB XA X9 X8 X7 X6 X5 X4 X3 X2 X1 X0
Off: Falling edge (ONOFF)
On: Rising edge (OFFON)
b15 b14 b13 b12 b11 b10 b9 b8 b7 b6 b5 b4 b3 b2 b1 b0
X1F X1E X1D X1C X1B X1A X19 X18 X17 X16 X15 X14 X13 X12 X11 X10
Off: Falling edge (ONOFF)
On: Rising edge (OFFON)
To Next Page
Loading...
