256
APPX
Appendix 6 Added and Changed Functions
Appendix 6 Added and Changed Functions
The functions added to or changed in the I/O module are shown.
Added functions
The following table shows the functions that were added to the I/O module and the versions supporting these functions.
*1 The function can be used regardless of the version.
Function changes
The following table shows the functions that were changed in the I/O module and the versions supporting these functions.
Details of addition Firmware version Profile version Reference
Communication speed setting function "02" or later "01" or later Page 175 Communication Speed Setting Function
CC-Link IE TSN Network synchronous
communication function
• Synchronous X/Y control mode
"03" or later "02" or later Page 157 CC-Link IE TSN Network Synchronous
Communication Function
Ring topology "03" or later
*1
Page 152 Network topology setting
"Station Information List" window display "03" or later
*1
Page 193 Checking station information
CC-Link IE TSN Network synchronous
communication function
• Synchronization cycle timing control mode
• Set time synchronization control mode
"05" or later "03" or later Page 157 CC-Link IE TSN Network Synchronous
Communication Function
Details of change Firmware version Reference
Setting values of the communication cycle
interval setting
"02" or later Page 151 Communication cycle interval setting
Setting values of the communication cycle
interval setting
"03" or later Page 151 Communication cycle interval setting
Operation in multicast mode "03" or later Page 152 Communication mode
To Next Page
Loading...
