Mitsubishi Electric NZ2GN2S1-32D - Page 237

APPX
Appendix 2 Remote Register
235
A
Output Y current value
■Device number
■Description
• Actual on/off status of output Y can be checked by using Output Y current value Y (RWrA, RWrB).
• Output Y current value Y (RWrA, RWrB) can always be used while a data link is established.
• The amount of time delay from when Output Y current value Y (RWrA, RWrB) changes until the external output
accordingly changes is no more than the maximum output response time.
When the synchronization output timing setting control or the output time setting control (CC-Link IE TSN
Network synchronous communication function) is used, the on/off status of output Y can be checked by using
Output Y current value Y (RWrA, RWrB).
■Output Y current value Y0 to YF (RWrA)
■Output Y current value Y10 to Y1F (RWrB)
Name Device number
Output Y current value RWrA, RWrB
b15 b14 b13 b12 b11 b10 b9 b8 b7 b6 b5 b4 b3 b2 b1 b0
YF YE YD YC YB YA Y9 Y8 Y7 Y6 Y5 Y4 Y3 Y2 Y1 Y0
Off: Output Y is off.
On: Output Y is on.
b15 b14 b13 b12 b11 b10 b9 b8 b7 b6 b5 b4 b3 b2 b1 b0
Y1F Y1E Y1D Y1C Y1B Y1A Y19 Y18 Y17 Y16 Y15 Y14 Y13 Y12 Y11 Y10
Off: Output Y is off.
On: Output Y is on.