To Next PageTo Next Page
Need help?Do you have a question about the Mitsubishi Electric P93E and is the answer not in the manual?
General| Brand | Mitsubishi Electric |
|---|---|
| Model | P93E |
| Category | Media Converter |
| Language | English |
Contains critical warnings, cautions, and notes regarding device operation and compliance.
Details electrical shock hazards, warnings, and explains various safety symbols used in the manual.
Provides warnings on power cord use, earthing, cable requirements, and disposal of electronic equipment.
Details the components and controls located on the front panel of the device.
Details the connectors and switches located on the rear panel of the device.
Illustrates how to connect composite video sources like VCRs and monitors.
Provides an example of DIP switch configuration for specific functions.
Demonstrates connecting medical equipment via video signals.
Shows DIP switch configuration for medical video signal input.
Step-by-step guide on how to perform basic printing operations.
Explains how to set and use the copy printing feature for multiple prints.
Describes how to cancel an ongoing copy printing sequence.
Details the procedure for manually feeding paper into the unit.
Instructions on connecting and using the wired remote control for printing.
Advisories on preventing overheating and paper jams during printing.
Explains how to activate and use the paper saving mode.
Guide on adjusting brightness and contrast of the printed image.
Explains how to access and navigate different function modes for settings.
Details how to adjust settings within function modes using the ADJUST control.
Describes how to select the gamma curve for optimal density based on the connected device.
Explains how to select previously printed images for copy printing or multi-image output.
How to select the second image for 2-multi image printing.
How to specify and adjust the horizontal print area for enlarged images.
How to specify and adjust the vertical print area for enlarged images.
Option to include BRT, CONT, and GAMMA values in the print output.
Allows selection between underscan and overscan for the print image.
Enables selection between positive and negative print patterns.
Controls the print direction, either normal or reversed (180 degrees).
Adjusts the amount of paper used for margins before the next print.
Selects the appropriate paper type (glossy, high-density, standard).
Extends the functionality of the PRINT button for copying or memorizing images.
Allows setting the quantity of prints for each operation.
Prints a table of LED indications and their corresponding function modes.
Allows selection of the printed image size (SIDE, NOR, 1:1).
Configures extended functions like multi-image or enlargement/reduction.
Illustrates print results based on SIZE and MODE switch combinations.
Describes how the unit automatically returns to standby after inactivity.
Explains how to memorize and recall custom settings for convenience.
Details the procedure for resetting brightness, contrast, and function values.
Describes symptoms of overheating and how to resolve them using button functions.
Explains the 'No Paper' error, its symptoms, and the procedure to install new paper.
Details button input errors, their causes, and indicator displays.
Describes door-related errors, symptoms, and how to close the door to resolve.
Explains gear lock errors, symptoms, and the power cycle remedy.
Details the function of each DIP switch for configuring special features.
Explains the meaning of LED indicators and various operational states and modes.
Step-by-step guide on using cleaning paper to maintain the thermal head.
Instructions for cleaning the front panel and main unit.
Guidance on cleaning the rubber roller to ensure print quality.
Refers to the specific procedure for cleaning the thermal head.
Lists key technical details, dimensions, power, and accessories of the Video Copy Processor.
Provides guidance on troubleshooting, service, and important operational warnings.
