24
Basic operations
Button operation
Air direction
Touch or to go through the airflow directions in
the following order.
Select the desired setting.
Auto
Swing
Select “Swing” to automatically swing the airflow
direction.
• The settable air directions depend on the indoor unit
model.
<Note>
The actual air direction will differ from the air direction
displayed on the LCD when one of the following conditions
is met.
• While “Standby” or “Defrost” is displayed
• When the room temperature is higher than the set
temperature during the heating mode
• Immediately after the heating operation (during stand by
for switching the operation mode)
icon
When this icon appears, the air direction setting will
automatically change in an hour and the icon will go off
(depending on the indoor unit model).
To Next Page
Loading...
