App - 6
APPENDICES
(k) Other instructions
(4) Dedicated instructions
(a) Direct processing instructions
(b) Structured program instructions
(c) Data operation instructions
(d) I/O operation instructions
WDT reset WDT, WDTP
Error check CHK
Status latch SLT, SLTR
Sampling trace STRA, STRAR
Carry flag set/reset 1 bit STC, CLC
Timing clock 1 bit DUTY
Direct output DOUT
Direct set DSET
Direct reset DRST
Circuit indexing IX, IXEND
Repeat forced termination BREAK
Subroutine call FCALL
Error check circuit pattern change CHK, CHKEND
32-bit data search DSER
16-bit upper/lower byte swap SWAP
Data separation DIS
Data association UNI
Bit test TEST, DTEST
Flip-flop control FF
Numeral key input from keyboard KEY
To Next Page
Loading...
