Mitsubishi Electric Q02HCPU-A - Page 65

4 - 19
CPU MODULE4.
(With Q06HCPU-A)
*1 When the capacity of comment or expanded comment is specified, the system occupies 1k
byte for each.
Item Setting Unit Capacity Calculation Formula Max. Available Memory Capacity
Write to
ROM
Remark
Parameter – 3k bytes (fixed) 3k bytes (fixed)
Tot al :
144k
bytes
Available
Main program
T/C set value – 1k byte (fixed) 1k byte (fixed)
Sequence program 1k step
Number of steps 2k bytes
60k bytes
Tot al :
60k
bytes
Microcomputer
program
1k byte Preset number of bytes 58k bytes
Dedicated
to SFC
MELSECNET/10 parameter
– See note 2, 3. 16k bytes
Subprogram
T/C set value 1k byte 1k byte 1k byte (fixed)
Sequence program 1k step
Number of steps 2k bytes
60k bytes
Microcomputer
program
– 5k bytes 5k bytes (fixed)
Not
available
Expanded comment 1k byte
Preset number of bytes (1k byte =
64 points)
63k bytes
*1
Extension file register (built-in) 8k points
Number of file register points 2k
bytes
128k bytes
File register 1k point
Number of file register points 2k
bytes
16k bytes
Comment 1k byte
Preset number of bytes (1k byte =
64 points)
64k bytes
*1
Extension file register (memory card) 8k points
Number of file register points 2k
bytes
304k bytes