To Next PageTo Next PageWhat to do if clock data cannot be set by SNTP for Mitsubishi Electric Q04UDVCPU Controller?
Check the following on the time setting function: SNTP is set to be used; Input of the SNTP server IP address is correct.
General| Series | Q Series |
|---|---|
| Model | Q04UDVCPU |
| Number of I/O Points | 4096 points |
| Data Memory | 128K words |
| SD Memory Card Interface | Yes |
| USB Interface | Yes |
| Power Supply | 24V DC |
| Operating Temperature | 0 to 55 °C |
| Storage Temperature | -25 to 75°C |
| Humidity | 5 to 95%RH, non-condensing |
| Vibration Resistance | 10 to 57 Hz |
| Shock Resistance | 147m/s², 3 times in each of the X, Y, and Z directions |
| Type | Programmable Logic Controller (PLC) |
| Communication Ports | RS-232 |
