211
CHAPTER 7 POWER SUPPLY MODULE
7
7.2 Specifications
7.2.1 Power supply module specifications
*1 For the descriptions of the specification items, refer to Page 213, Section 7.2.2.
Item
Performance specifications
A61PEU A62PEU
Mounting position Power supply module mounting slot
Applicable base unit QA6B
Input power supply 100 to 120/200 to 240VAC +10%/-15%
Input frequency 50/60Hz ±5%
Input voltage distortion
Within 5% ( Page 103, Section 4.8.1)
Max. input apparent power 130VA 155VA
Inrush current
*1
20A, 8ms or less
Rated output
current
5VDC 8A 5A
24VDC – 0.8A
Overcurrent
protection
*1
5VDC 8.8A or more 5.5A or more
24VDC – 1.2A or more
Overvoltage
protection
*1
5VDC 5.5 to 6.5V –
24VDC –
Efficiency 65% or more
Dielectric withstand
voltage
Between
primary side
and FG
2300VAC/1min (at a height of 0 to 2000m above sea level)
Noise durability
By noise simulator of noise voltage IEC 801-4, 2KV, 1500Vp-p,
noise width 1µs, and noise frequency 25 to 60Hz
Power indicator LED indication of power supply
Terminal screw size M4 × 0.7 × 6
Applicable wire size
0.75 to 2mm
2
Applicable solderless terminal RAV1.25-4, RAV2-4
Applicable tightening torque 98 to 137N•cm
External
dimensions
H250mm
W55mm
D121mm
Weight 0.8 kg 0.9 kg
Allowable momentary power failure
time
*1
20ms or less
To Next Page
Loading...
