Mitsubishi Electric Q06HCPU - Specifications of the Memory Card Battery

239
CHAPTER 9 MEMORY CARD
9
9.2 Specifications 9.2.2 Specifications of the memory card battery
9.2.2 Specifications of the memory card battery
This section describes the specifications of the battery used for the memory card (SRAM card).
Remark
• For the life of the memory card battery, refer to Page 630, Appendix 4.3.
• For the battery directive in EU member states, refer to Page 678, Appendix 12.
Item
Type
Q2MEM-BAT Q3MEM-BAT
Classification Graphite fluoride lithium primary battery Manganese dioxide lithium primary battery
Initial voltage 3.0V 3.0V
Nominal current 48mAh 550mAh
Battery life when stored Actually 5 years (room temperature)
Battery life when used
Page 630, Appendix 4.3
Lithium content 0.014g 0.150g
Application
Power failure backup for SRAM card
(for Q2MEM-1MBS/Q2MEM-2MBS)
Power failure backup for SRAM card
(for Q3MEM-4MBS/Q3MEM-8MBS)