EasyManua.ls Logo

Mitsubishi Electric Q06HCPU - Installation instructions for EMC Directive

Mitsubishi Electric Q06HCPU
720 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
652
Appendix 8.1.1 Standards relevant to the EMC Directive
(1) Regulations regarding emission
*1 QP: Quasi-peak value, Mean: Average value
*2 Programmable controllers are open-type devices (devices designed to be housed inside other equipment) and must be
installed inside a conductive control panel. The corresponding tests were conducted with the programmable controller
installed inside a control panel.
Standard Test item Test description Value specified in standard
EN61131-2:
2007
CISPR16-2-3
Radiated emission
*2
Radio waves from
the product are
measured.
30M-230MHz
QP: 40dB µ V/m (10m in
measurement range)
*1
230M-1000MHz
QP: 47dB µ V/m (10m in
measurement range)
CISPR16-2-1,
CISPR16-1-2
Conducted emission
*2
Noise from the product to the
power line is measured.
150k-500kHz
QP: 79dB, Mean: 66dB
*1
500k-30MHz
QP: 73dB, Mean: 60dB

Table of Contents

Related product manuals