76
(3) Installation and removal of on/from QA6B
(a) Installation of module on QA6B
For use in an environment with particularly frequent vibrations and/or shock, secure the module to the base with screws.
Module fixing screw: M4 × 0.7 × 12mm (User-prepared)
Insert the two module fixing projections
into the module fixing hole (B) in the
base unit.
Check if the hook of the module is
securely inserted in the module fixing
hole (A) in the base unit.
Mount the module into the base unit by
pushing it in the direction of the arrow.
Completed
Module fixing hole (A)
Hook
Module fixing hole (B)
Two module
fixing
projections
Module
Base unit
Module
connector
To Next Page
Loading...
