Mitsubishi Electric Q06HCPU - Connection and disconnection of extension cable

83
CHAPTER 4 INSTALLATION AND WIRING
4
4.3 Connecting an Extension Base Unit 4.3.1 Setting the extension base number
(c) When connector pins are connected in more than 2 positions, or no pin is used
The extension base unit cannot be used when connector pins for base number setting are inserted in more
than two positions and when not using any connector pin.
(d) Position of the AnS/A series-compatible extension base unit
(QA1S6ADP+A1S5B/A1S6B) in the system
For precautions when using the QA1S6ADP+A1S5B/A1S6B in the system, refer to the following.
QA1S6ADP Q-AnS Base Unit Conversion Adapter User's Manual
QA1S6ADP-S1 Q-AnS Base Unit Conversion Adapter User's Manual
Power supply
module
CPU module
Extension 1
Main base unit
Slot number
CPU01234567891011
Extension 2
Extension base unit
Q312B
Q68B
Q68B
Connector pin must be inserted!
Connector pins must not be
inserted in 2 or more positions!