Mitsubishi Electric Q12DCCPU-V - Remote Operation Function

4 - 5
4.3 Remote Operation Function
4
FUNCTIONS
4.3 Remote Operation Function
The remote operation function controls the operation status of the C Controller module or
a programmable controller CPU from the user program or C Controller setting utility of the
development environment (personal computer).
Create the user program of the C Controller module using bus interface functions.
There are the following three different remote operations.
• Remote RUN/STOP : Page 4-6, Section 4.3.1
• Remote PAUSE : Page 4-9, Section 4.3.2
• Remote RESET : Page 4-11, Section 4.3.3
Remark
Remote RESET is executable for C Controller modules and CPU No.1
(programmable controller CPU).
Q12DCCPU-V
Q06CCPU-V
Q06CCPU-V-B