4
FUNCTIONS
4.3 Remote Operation Function
4.3.3 Remote RESET
4 - 14
1
OVERVIEW
2
SYSTEM
CONFIGURATION
3
SPECIFICATIONS
4
FUNCTIONS
5
ACCESS VIA NETWORK
MODULES
6
PREPARATORY
PROCEDURES AND
SETTING
7
I/O NUMBER
ASSIGNMENT
8
MEMORIES AND FILES
(6) Methods for remote RESET
The remote RESET can be executed by either of the following two methods: "Using
user program" and "Using development environment (personal computer).
(a) Using user program
Execute a bus interface function (QBF_Reset) from the user program to perform
remote RESET.
For the bus interface function, refer to the following manual.
C Controller Module User's Manual (Utility Operation, Programming)
(b) Using development environment (personal computer)
In <<Online operation>> of C Controller setting utility, perform as described below.
1) When files are opened in a user program on the C Controller module, close all
programs.
2) Set "Remote operation" to "RESET".
3) Click to execute remote RESET.
Figure 4.5 Remote RESET from development environment (personal computer)
Execute
2) Click
Execute button.
1) Set to "RESET".
To Next Page
Loading...
