Mitsubishi Electric Q12DCCPU-V - Device Function; Device List; Settings for Using Device Functions

4
FUNCTIONS
4.4 Device Function
4 - 18
1
OVERVIEW
2
SYSTEM CONFIGURATION
3
SPECIFICATIONS
4
FUNCTIONS
5
ACCESS VIA NETWORK MODULES
6
PREPARATORY PROCEDURES AND SETTING
7
I/O NUMBER ASSIGNMENT
8
MEMORIES AND FILES
4.4 Device Function
(1) Device function
Creates a device such as a programmable controller CPU in work RAM on the C
Controller module.
Device function cannot be used for the following C Controller modules.
• Q12DCCPU-V with a serial number whose first five digits are "12041" or earlier
(2) Device list
The following shows devices that can be created.
(3) Settings for using device functions
Device settings require to set in the <<Device settings>> tab of the C Controller
setting utility to use device functions.
For the C Controller setting utility, refer to the following.
C Controller Module User's Manual (Utility Operation, Programming)
POINT
When setting the number of device points, set it in units of 16 points.
Table 4.4 Device list
Type Device name
Default value
Utility-set range
Number of points Range
Bit device Internal relay 8192 points M0 to 8191 Decimal 0 to 60K
Word device Data register 12288 points D0 to 12287 Decimal 0 to 4086K
Q12DCCPU-V
Q06CCPU-V
Q06CCPU-V-B