Mitsubishi Electric Q12DCCPU-V - Input Response Time Selection (I;O Response Time); What Is the Input Response Time Selection?

4
FUNCTIONS
4.8 Input Response Time Selection (I/O Response Time)
4 - 34
1
OVERVIEW
2
SYSTEM CONFIGURATION
3
SPECIFICATIONS
4
FUNCTIONS
5
ACCESS VIA NETWORK MODULES
6
PREPARATORY PROCEDURES AND SETTING
7
I/O NUMBER ASSIGNMENT
8
MEMORIES AND FILES
4.8 Input Response Time Selection (I/O Response Time)
(1) What is the input response time selection?
The input response time can be changed for each Q series module.
The following table shows the modules whose input response time can be changed
and time options for them.
The above Q series modules load external inputs within the specified input response
time.
Table 4.9 Modules whose input response time can be changed
Module whose input response time
can be changed
Type Option
Input module Input 1ms, 5ms, 10ms, 20ms, 70ms
(Default: 10ms)
I/O combined module I/O Mix
High-speed input module Hi Input 0.1ms, 0.2ms, 0.4ms, 0.6ms, 1ms
(Default: 0.2ms)
Interrupt module Interrupt
Figure 4.11 Input response time
Q12DCCPU-V
Q06CCPU-V
Q06CCPU-V-B
OFF
OFF
ON
ON
Input response time
Q series module
External input