Mitsubishi Electric Q12DCCPU-V - Input Response Time Setting; When the Input Response Time Is Reduced; Timing When the Setting Takes Effect

4 - 35
4.8 Input Response Time Selection (I/O Response Time)
4
FUNCTIONS
(2) Input response time setting
The input response time is set in "I/O assignment" in <<I/O assignment settings>> of
C Controller setting utility.
1) Configure the I/O assignment settings.
2) Select .
3) Set each input response time in the "I/O module, Intelligent function module
detailed settings" window.
(3) Precautions
(a) When the input response time is reduced
Reducing the input response time value for high-speed response will make the
module noise-sensitive.
Take into account the operating environment when setting the input response
time.
(b) Timing when the setting takes effect
The input response time setting takes effect when:
• The C Controller system is powered on, or
• The C Controller module is reset.
Figure 4.12 Input response time setting
Detailed settings
1) Configure I/O assignment settings. 2) Click the Detailed settings button. 3) Select an input response time.