Mitsubishi Electric Q12DCCPU-V - Hardware Error Time CPU Operation Mode Setting

4 - 37
4.10 Hardware Error Time CPU Operation Mode Setting
4
FUNCTIONS
4.10 Hardware Error Time CPU Operation Mode Setting
(1) What is the hardware error time CPU operation mode setting?
This setting determines whether to stop or continue the output (Y) from the C
Controller module and writing to the buffer memory if a hardware error occurs in an
intelligent function module or interrupt module.
(2) Hardware error time CPU operation mode setting
This is set in "I/O assignment" in << I/O assignment settings>> of C Controller setting
utility.
1) Configure the I/O assignment settings.
2) Select .
3) Select a CPU operation mode in case of a hardware error for each slot. (The
default is "Stop".)
(3) Precautions
The hardware error time CPU operation mode setting takes effect when:
• The C Controller system is powered on.
• The C Controller module is reset.
Figure 4.14 Hardware error time CPU operation mode setting
Q12DCCPU-V
Q06CCPU-V
Q06CCPU-V-B
Detailed settings
1) Configure I/O assignment settings.
2) Click the Detailed settings button. 3) Select "Stop" or "Continue."