4 - 39
4.11 Switch Settings for I/O and Intelligent Function Modules
4
FUNCTIONS
(3) Switch setting of intelligent function modules and interrupt modules
The switches of intelligent function modules and interrupt modules are set in "I/O
assignment" in << I/O assignment settings>> of C Controller setting utility.
1) Configure the I/O assignment settings.
2) Select .
3) Set the switches of each module.
(4) Precautions
(a) For the switch settings of intelligent function modules and interrupt modules, refer
to the following.
Manual for each intelligent function module or interrupt module
(b) The settings for intelligent function modules and interrupt modules take effect
when:
• The C Controller system is powered on.
• The C Controller module reset is completed.
Figure 4.16 Switch setting
1) Configure I/O assignment settings. 2) Click the Switch settings button.
3) Set the intelligent function module
and interrupt module switches.
To Next Page
Loading...
