Mitsubishi Electric Q12DCCPU-V - MELSECNET;H Utility: Refresh Parameter Settings Screen

5 - 30
5.3 MELSECNET/H Module Access Function
5.3.4 Link device refresh setting
5
ACCESS VIA NETWORK MODULES
(c) MELSECNET/H utility: Refresh parameter settings screen
Remark
For the MELSECNET/H utility, refer to the following.
C Controller Module User's Manual (Utility Operation, Programming)
Figure 5.29 MELSECNET/H module (1st module) setting
Figure 5.30 MELSECNET/H module (2nd module) setting