Mitsubishi Electric Q12DCCPU-V - Battery Specifications

6
PREPARATORY PROCEDURES AND SETTING
6.7 Specifications, Installation, and Replacement of the Battery
6.7.1 Battery specifications
6 - 47
1
OVERVIEW
2
SYSTEM CONFIGURATION
3
SPECIFICATIONS
4
FUNCTIONS
5
ACCESS VIA NETWORK MODULES
6
PREPARATORY PROCEDURES AND SETTING
7
I/O NUMBER ASSIGNMENT
8
MEMORIES AND FILES
6.7 Specifications, Installation, and Replacement of the Battery
This section explains specifications, installation, and replacement of the battery.
6.7.1 Battery specifications
The following table indicates the specifications of the batteries for the C Controller module.
* 1 For the Q06CCPU-V(-B), the Q7BAT cannot be used.
* 2 Supplied only with Q7BAT-SET.
* 3 The lithium content of batteries manufactured in November 2017 or earlier differs from this list. For
details, refer to the following.
Technical bulletin No. FA-A-0242
Remark
• For the battery life, refer to Page 6-51, Section 6.7.3 (2).
• For the battery directive in EU member states, refer to Appendix 4.
Table 6.16 Battery specifications
Item
Model
Q6BAT
Q7BAT
*1
Type Manganese dioxide lithium primary battery
Initial voltage 3.0V
Nominal current 1800mAh 5000mAh
Battery life when stored Actual 5 years (room temperature)
Battery life when used
Page 6-51, Section 6.7.3 (2)
Lithium content
0.57g
*3
1.55g
Application
Backup of the standard RAM files
Protection of the standard ROM files
Backup of the battery-backed-up RAM data
Backup of clock data
Accessories -
Battery holder
*2
Q12DCCPU-V
Q06CCPU-V
Q06CCPU-V-B
Q12DCCPU-V
Q06CCPU-V
Q06CCPU-V-B