Mitsubishi Electric Q12DCCPU-V - Initializing;Changing Mode of C Controller Module; Initialization Setting for C Controller Module; Changing Mode of Q12 DCCPU-V

6 - 72
6.10 Initializing/Changing Mode of C Controller Module
6.10.1 Initializing/Changing mode of Q12DCCPU-V
6
PREPARATORY PROCEDURES AND SETTING
6.10 Initializing/Changing Mode of C Controller Module
6.10.1 Initializing/Changing mode of Q12DCCPU-V
(1) Initialization setting for C Controller module
Data such as parameter files saved in the C Controller module can be initialized by
performing the following operations.
• The "Default IP setting" mode execution of the C Controller module
( Page 6-75, Section 6.10.1 (5))
• The module initialization setting procedure of the C Controller module
( Page 6-77, Section 6.10.1 (6))
(2) Changing mode of Q12DCCPU-V (Basic mode/Extended mode)
The mode switching of the modules can be performed by the initialization setting.
For operation of switching to the extended mode, refer to the following manual.
MELSEC-Q C Controller Module User's Manual
Remark
To initialize login user information of the C Controller module, refer to the
following.
Page 6-89, Section 6.11.2
Q12DCCPU-V
Q06CCPU-V
Q06CCPU-V-B
Q12DCCPU-V
Q06CCPU-V
Q06CCPU-V-B