Mitsubishi Electric Q12DCCPU-V - Setting the Q06 CCPU-V(-B) Back to the Factory-Set Status

6
PREPARATORY PROCEDURES AND SETTING
6.10 Initializing/Changing Mode of C Controller Module
6.10.2 Setting the Q06CCPU-V(-B) back to the factory-set status
6 - 81
1
OVERVIEW
2
SYSTEM CONFIGURATION
3
SPECIFICATIONS
4
FUNCTIONS
5
ACCESS VIA NETWORK MODULES
6
PREPARATORY PROCEDURES AND SETTING
7
I/O NUMBER ASSIGNMENT
8
MEMORIES AND FILES
6.10.2 Setting the Q06CCPU-V(-B) back to the factory-set status
Data such as parameter files saved in the C Controller module can be initialized to the
factory-set status by performing the following operations.
• Executing the "Default IP setting" mode of the C Controller module
( Page 6-84, Section 6.10.2 (3))
• Formatting the standard ROM of the C Controller module
( Page 6-85, Section 6.10.2 (4))
Remark
For initialization of login user information of the C Controller module, refer to the
following.
Page 6-89, Section 6.11.2
Q12DCCPU-V
Q06CCPU-V
Q06CCPU-V-B