Mitsubishi Electric Q12DCCPU-V - Last I;O Number

7
I/O NUMBER ASSIGNMENT
7.6 I/O Assignment by C Controller Setting Utility
7.6.2 Details of I/O assignment by C Controller setting utility
7 - 22
1
OVERVIEW
2
SYSTEM CONFIGURATION
3
SPECIFICATIONS
4
FUNCTIONS
5
ACCESS VIA NETWORK MODULES
6
PREPARATORY PROCEDURES AND SETTING
7
I/O NUMBER ASSIGNMENT
8
MEMORIES AND FILES
5) Last I/O number
In the I/O assignment settings, the last I/O number must be FFF
H or lower.
If it exceeds FFF
H, an intelligent function module assignment error (error code:
2124, SP.UNIT LAY ERR.) will occur.