Mitsubishi Electric Q12DCCPU-V - Target Setting in C Controller Setting Utility

12 - 10
12.2 CPU No. of CPU Module
12
CONCEPT OF MULTIPLE CPU SYSTEM
The following are CPU No. application examples.
• Diagnosing the communication from the <<Communication diagnostics>> tab of
C Controller setting utility
• Setting control CPU in the <<I/O assignment settings>> tab of C Controller
setting utility ( Page 14-7, Section 14.1.6)
Remark
For how to check host CPU No. of a programmable controller CPU or Motion
CPU, refer to the manual for the relevant CPU module.
Figure 12.4 Target setting in C Controller setting utility
Figure 12.5 Control CPU setting
Slot number
34CPU 0 1 2
Communicates
with CPU No.2.
CPU number
1 43
2
Ethernet
Development environment
(personal computer)
Select
No.2.
Control CPU setting