Mitsubishi Electric Q12DCCPU-V - Interrupts from Other Cpus

1
OVERVIEW
1.1 Features
1 - 7
1
OVERVIEW
2
SYSTEM CONFIGURATION
3
SPECIFICATIONS
4
FUNCTIONS
5
ACCESS VIA NETWORK MODULES
6
PREPARATORY PROCEDURES AND SETTING
7
I/O NUMBER ASSIGNMENT
8
MEMORIES AND FILES
(b) Interrupt from an intelligent function module or an interrupt module
Interrupt routines (interrupt programs) can be executed, corresponding to the
interrupts from the intelligent function module or the interrupt module.
An interrupt routine (interrupt program) allows a real-time control responding to an
event occurred in the intelligent function module or an input from an external
device to the interrupt module.
Interrupt routines (interrupt programs) cannot be executed for the following C
Controller modules.
• Q12DCCPU-V with a serial number whose first five digits are "12041" or
earlier
(c) Interrupts from other CPUs
Interrupt routines (interrupt programs) can be executed for interrupts from other
CPUs (programmable controller CPUs or C Controller modules).
Real-time sequential controls synchronized with controls from another CPU can
be used through interrupt routines (interrupt programs).
Interrupt routines (interrupt programs) cannot be executed for the following C
Controller modules.
• Q12DCCPU-V with a serial number whose first five digits are "12041" or
earlier