Mitsubishi Electric Q12DCCPU-V - Programmable Controller Remote Control Function

13 - 42
13.4 Programmable Controller Remote Control Function
13
COMMUNICATIONS BETWEEN CPU MODULES
13.4 Programmable Controller Remote Control Function
(1) Programmable controller remote controller function
This function allows the C Controller module to control the execution status of a
programmable controller CPU.
Use a MELSEC data link function when creating a user program of the C Controller
module.
Remark
For the MELSEC data link functions, refer to the following.
C Controller Module User's Manual (Utility Operation, Programming)
Figure 13.29 Programmable controller remote control
Q12DCCPU-V
Q06CCPU-V
Q06CCPU-V-B
Programmable
controller CPU
RUN
STOP
PAUSE
Execution status
C Controller module
/* Controls the execution status of the programmable
controller CPU */
ret = mdControl(path, stno, code);
1)
1) Controls the execution status of the
programmable controller CPU
from the C Controller module.