1
OVERVIEW
1.1 Features
1 - 9
1
OVERVIEW
2
SYSTEM
CONFIGURATION
3
SPECIFICATIONS
4
FUNCTIONS
5
ACCESS VIA NETWORK
MODULES
6
PREPARATORY
PROCEDURES AND
SETTING
7
I/O NUMBER
ASSIGNMENT
8
MEMORIES AND FILES
(7) More efficient debugging and easy device monitoring and
troubleshooting using the 7-segment LED display (Q12DCCPU-V only)
Without a computer, users can debug programs, check the operating status, and
diagnose some failure easily by viewing the LED display. (Monitoring is available from
a personal computer.)
(8) Easy configuration and startup of positioning modules (Q12DCCPU-V
only)
By using GX Configurator-QP, which is a setting, monitoring and testing tool for
positioning modules, the engineering cost can be reduced because parameter-setting
programs are no more needed.
The programming and debugging efficiency for positioning modules will be
remarkably improved.
Figure 1.9 7-segment LED display
Figure 1.10 Easy configuration and startup of positioning modules
"2.2" is flashing in the control
panel. Why?
The cause of "2.2" flashing is
xxx. Our service representative
will visit you as soon as possible.
End user Manufacturer
Drive unit
Drive unit
Motor
Motor
Development environment (personal computer)
USB
GX Configurator-QP
To Next Page
Loading...
