Mitsubishi Electric Q12DCCPU-V - Devices Used for each Base Unit; When Using the Main Base Unit

2 - 2
2.1 System Configuration
2.1.1 Devices used for each base unit
2
SYSTEM CONFIGURATION
2.1.1 Devices used for each base unit
(1) When using the main base unit (Q3 B)
* 1 For the Q06CCPU-V-B, CompactFlash cards cannot be used.
* 2 For the Q06CCPU-V(-B), the Q7BAT cannot be used.
Remark
• For applicable base units, extension cables, and power supply modules, refer to
the following.
Page 2-9, Section 2.1.4 (1)
• For applicable I/O modules and intelligent function modules, refer to the
following.
Page 2-17, Section 2.2.1
Figure 2.1 When a main base unit is used
Battery
*2
C Controller module
Main base unit
Q series power supply, I/O, Intelligent function modules
Extension cable
Extension base unit
CompactFlash card (sold
separately)
*1