Mitsubishi Electric Q12DCCPU-V - When Using the Slim Type Main Base Unit

2
SYSTEM CONFIGURATION
2.1 System Configuration
2.1.1 Devices used for each base unit
2 - 3
1
OVERVIEW
2
SYSTEM CONFIGURATION
3
SPECIFICATIONS
4
FUNCTIONS
5
ACCESS VIA NETWORK MODULES
6
PREPARATORY PROCEDURES AND SETTING
7
I/O NUMBER ASSIGNMENT
8
MEMORIES AND FILES
(2) When using the slim type main base unit (Q3 SB)
* 1 For the Q06CCPU-V-B, CompactFlash cards cannot be used.
* 2 For the Q06CCPU-V(-B), the Q7BAT cannot be used.
Remark
• For applicable base units and power supply modules, refer to the following.
Page 2-11, Section 2.1.4 (2)
• For applicable I/O modules and intelligent function modules, refer to the
following.
Page 2-17, Section 2.2.1
Figure 2.2 When a slim type main base unit is used
C Controller module
Slim type main base unit
Q series power supply, I/O, Intelligent function modules
CompactFlash card (sold
separately)
*1
Battery
*2