Mitsubishi Electric Q12DCCPU-V - When Using the Multiple CPU High Speed Main Base Unit

2 - 4
2.1 System Configuration
2.1.1 Devices used for each base unit
2
SYSTEM CONFIGURATION
(3) When using the multiple CPU high speed main base unit (Q3 DB)
* 1 For the Q06CCPU-V-B, CompactFlash cards cannot be used.
* 2 For the Q06CCPU-V(-B), the Q7BAT cannot be used.
Remark
• For applicable base units and power supply modules, refer to the following.
Page 2-12, Section 2.1.4 (3)
• For applicable I/O modules and intelligent function modules, refer to the
following.
Page 2-17, Section 2.2.1
Figure 2.3 When a multiple CPU high speed main base unit is used
Q series power supply, I/O, Intelligent function modules
C Controller module
CompactFlash card (sold
separately)
*1
Extension base unit
Battery
*2
Q3 DB multiple CPU high
speed main base unit
Extension cable