Mitsubishi Electric Q12DCCPU-V - Connection with a Development Environment; For the Q12 DCCPU-V

2
SYSTEM CONFIGURATION
2.1 System Configuration
2.1.2 Connection with a development environment
2 - 5
1
OVERVIEW
2
SYSTEM CONFIGURATION
3
SPECIFICATIONS
4
FUNCTIONS
5
ACCESS VIA NETWORK MODULES
6
PREPARATORY PROCEDURES AND SETTING
7
I/O NUMBER ASSIGNMENT
8
MEMORIES AND FILES
2.1.2 Connection with a development environment
(1) For the Q12DCCPU-V
* 1 To write a user file to a CompactFlash card, a personal computer such as a laptop that has the
PCMCIA interface, or a personal computer with a CompactFlash card reader/writer connected is
required.
* 2 CW Workbench or Wind River Workbench (sold separately).
For Wind River Workbench specifications and inquiries, visit the website of Wind River Systems,
Inc.
www.windriver.com
Figure 2.4 Connection with a development environment
C Controller module
Development environment*
1
(personal computer)
Twisted pair cable
(Straight cable or crossing
cable)
(sold separately)
Adaptor*
1
(sold separately)
Workbench*
2
SW3PVC-CCPU
CompactFlash card (sold
separately)*
3
CompactFlash card
(sold separately)*
3