Mitsubishi Electric Q12DCCPU-V - GX Developer

APPX - 30
Appendix 9 Connection with GX Works2/GX Developer
Appendix 9.1 When accessing another CPU of a multiple CPU system
APPENDICES
(2) GX Developer
(a) USB connection
To access another CPU module of a multiple CPU system from the C Controller
module via USB, follow the procedure below.
1) [Online] Select [Transfer setup].
2) Set "PC side I/F" to "Serial USB".
Set the detailed setting dialog box as follows.
• Select "USB". RS-232C cannot be used.
2)
3)
4)
5)