Mitsubishi Electric Q12DCCPU-V - Accessing the Host Station

APPENDICES
Appendix 10 Connection with MX Component
Appendix 10.1 Accessing the host station
APPX - 37
A
I
Appendix 10 Connection with MX Component
This section explains the setting method of when connecting MX Component to a C
Controller module.
This section does not cover precautions and tips on the use of MX Component.
For precautions and tips on the use of MX Component, refer to the following.
MX Component Version 3 Operating Manual
Appendix 10.1 Accessing the host station
(1) USB Connection
To access the host station from the C Controller module via USB, follow the procedure
below.
1) Start the communication setting wizard from the communication setting utility.
2) Select a value for logical station number, and click the button.
Q12DCCPU-V
Q06CCPU-V
Q06CCPU-V-B
Next >