EasyManua.ls Logo

Mitsubishi Electric Q12DCCPU-V - Applicable Modules; Applicable I;O Modules and Intelligent Function Modules

Mitsubishi Electric Q12DCCPU-V
618 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2
SYSTEM CONFIGURATION
2.2 Applicable Modules
2.2.1 Applicable I/O modules and intelligent function modules
2 - 17
1
OVERVIEW
2
SYSTEM
CONFIGURATION
3
SPECIFICATIONS
4
FUNCTIONS
5
ACCESS VIA NETWORK
MODULES
6
PREPARATORY
PROCEDURES AND
SETTING
7
I/O NUMBER
ASSIGNMENT
8
MEMORIES AND FILES
2.2 Applicable Modules
This section introduces modules applicable to the C Controller module.
Precautions for using I/O modules and intelligent function modules, refer to the following.
Page 2-19, Section 2.2.2
2.2.1 Applicable I/O modules and intelligent function modules
The following table indicates the MELSEC-Q series I/O modules and intelligent function
modules that can be used with the C Controller module.
The MELSEC-AnS/Q2AS series I/O modules and special function modules are not
applicable.
(To the next page)
Table 2.4 Applicable modules
Module type Model Restrictions
AC input module Q series modules are applicable.
For details, refer to the manual for respective
modules.
-
DC input module
DC/AC input module
High-speed input module QX40H, QX70H, QX80H, QX90H -
High-speed output module QY41H -
Contact output module
Q series modules are applicable.
For details, refer to the manual for respective
modules.
-
Triac output module
Transistor output module
DC input/transistor output
combined module
Interrupt module
QI60
-
QX40H, QX70H, QX80H, QX90H
(The module is available only when the
interrupt module is selected by setting the
function selector switch (SW2) to OFF.)
A/D converter module Q64AD, Q68ADV, Q68ADI Use the product of function version B or later.
Channel isolated A/D
converter module
Q64AD-GH, Q62AD-DGH, Q68AD-G,
Q66AD-DG
-
D/A converter module
Q62DAN, Q64DAN, Q68DAVN, Q68DAIN -
Q62DA, Q64DA, Q68DAV, Q68DAI Use the product of function version B or later.
Channel-isolated D/A
converter module
Q66DA-G, Q62DA-FG -
Analog Input/Output Module Q64AD2DA -
Load Cell Input Module Q61LD -
Channel-isolated
temperature input module
Q64TD, Q68TD-G-H01, Q68TD-G-H02,
Q68RD3-G
-
Q64TDV-GH, Q64RD-G Use the product of function version B or later.
Temperature input module Q64RD -
Temperature control module
Q64TCTTN, Q64TCTTBWN, Q64TCRTN,
Q64TCRTBWN
-
Q64TCTT, Q64TCTTBW, Q64TCRT,
Q64TCRTBW
Use the product of function version B or later.
Loop control module Q62HLC -

Table of Contents

Related product manuals