2 - 24
2.3 Software Packages
2
SYSTEM CONFIGURATION
2.3 Software Packages
The following software packages can be used for the C Controller module.
(1) For the Q12DCCPU-V
* 1 Can be connected when using Q12DCCPU-V with a serial number whose first five digits are
"15102" or later with the extended mode.
(2) For the Q06CCPU-V
(3) For the Q06CCPU-V-B
Table 2.6 Software packages
Software Version
SW3PVC-CCPU Version 3.03D or later
SW4PVC-CCPU
*1
Version 4.04E or later
GX Works2 Version 1.50C or later
GX Developer
Version 8.76E or later and must be appropriate
to the connected CPU.
GX Configurator-QP Version 2.31H or later
MT Works2 Versions that must be appropriate to the
connected Motion CPU
MT Developer
MX Component Version 3.14Q or later
Table 2.7 Software package
Software Version
SW3PVC-CCPU Version 3.00A or later
Table 2.8 Software package
Software Version
SW3PVC-CCPU
Version 3.01B or later
To Next Page
Loading...
