2 - 28
2.4 Applicable Devices
2
SYSTEM CONFIGURATION
(5) USB cable (Q12DCCPU-V only)
(a) The C Controller module is accessible from the following software packages by
pre-installing a USB driver in Windows
®
.
(For how to install the USB driver, refer to the manual for the software package to
be used.)
•GX Works2
• GX Developer
• GX Configurator-QP
•MT Works2
• MT Developer
• MX Component
(b) For use of USB cables, only one C Controller module can be connected.
The following are inappropriate configuration examples.
Figure 2.13 Configurations where USB cables cannot be used
Development environment
(personal computer)
C Controller module
C Controller module
USB hub
USB
cable
USB
cable
USB
cable
Development environment
(personal computer)
C Controller module
C Controller module
USB
cable
Connection from multiple USB ports on a personal computer to multiple C Controller modules
Connection to multiple C Controller modules via a USB hub
USB
cable
<Inappropriate configurations>
To Next Page
Loading...
