Mitsubishi Electric Q12DCCPU-V - RS-232 Connector Specifications; RS-232 Connector Specifications for the Q12 DCCPU-V

3 - 4
3.3 RS-232 Connector Specifications
3.3.1 RS-232 connector specifications for the Q12DCCPU-V
3
SPECIFICATIONS
3.3 RS-232 Connector Specifications
The RS-232 connector specifications are shown below.
3.3.1 RS-232 connector specifications for the Q12DCCPU-V
(1) Cable connection to the C Controller module through the Q12DCCPU-
CBL (RS-232 connector conversion cable)
(a) RS-232 connector specifications
(b) Connector shell for connection cable
Use the following connector shell on the Q12DCCPU-CBL side.
•DDK Ltd.
Plug, shell: 17JE-23090-02(D8A)(-CG)
• Connector fitting screw (M2.6)
Table 3.3 RS-232 connector specifications
Pin No. Mnemonic Signal name
Signal direction
Q12DCCPU-CBL RS-232 device
1 CD(DCD) Data Carrier Detect
2 RD(RXD) Received Data
3 SD(TXD) Transmitted Data
4 ER(DTR) Data Terminal Ready
5 SG Signal Ground
6 DR(DSR) Data Set Ready
7 RS(RTS) Request To Send
8 CS(CTS) Clear To Send
9 CI(RI) Ring Indicator
Q12DCCPU-V
Q06CCPU-V
Q06CCPU-V-B
Q12DCCPU-V
Q06CCPU-V Q06CCPU-V-B
1
2
3
4
5
6
7
8
9